• Premium Racing Drone
  • Premium Racing Drone
  • Premium Racing Drone
  • Premium Racing Drone
  • Premium Racing Drone
  • Premium Racing Drone
  • Premium Racing Drone
  • Premium Racing Drone
  • Premium Racing Drone
  • Premium Racing Drone
  • Premium Racing Drone
  • Premium Racing Drone
New Zealand Trends

Premium Racing Drone

$NZD 252.99 $NZD 924.99 SAVE 73%



ShopCalifornia’s Super Sale is Back!

1. This is the DIY version that comes unassembled.
2. Make sure the antenna is installed at the output end before powering up to avoid damaging internal components;
3. Note that the input voltage is within the specified range and is correct and correct to avoid damaging internal components;
4. If the antenna is replaced, select a standing wave and a gain antenna for a longer transmission distance;
5. Pay attention to classic protection during transportation and installation.



Item Specification
210mm Frame Kit

Wheel base: 210mm

Frame arm thickness: 5mm

Bottom plate thickness: 2mm

Side plate thickness: 2mm

Frame kit material: 3K carbon fiber & 6065 aluminium 

2206 2150KV Brushless Motor

Motor KV: 2150RPM/V 

Idle current (Io/10V): 1.26A

Lipo cell: 3-5S

Weight: 31g

Max continuous current: 31A

Max continuous power: 496W

Max thrust: 1050g (4S/5")

Configu-ration: 12N/14P

Motor resistance (RM): 0.0572 Ω 

Stator diameter: 22mm

Stator thickness: 6mm

Motor diameter: 27.7mm

Motor body length: 19.2mm

Overall shaft length: 34.2mm

Prop adapter shaft: M5

Bolt holes spacing: 16mm

Bolt thread: M3

Propeller: 5-6 inch

4 IN 1 30A BLHeli_S ESC

Continuous current: 30A

Peak Current: 40A(10S)

Input voltage: 2-5S


Main control chip: 48Mhz EFM8BB2

Firmware: BLHeli_S supports Dshot600
MOS: 5*6

Customized F4 Flight Controller

Main control chip: STM32F405

Sensor: ICM20602 6-axis

Power supply: 5V

Integrated OSD

Onboard LC filter

PID cycle rate & gyro refresh rate up to 32Khz

Supports BetaFlight / inav racing firmware

700TVL CMOS Camera

Case size: 25mm*25mm

Weight: 9.5g

Total pixels: PAL: 1020H×596V (0.61MP); NTSC: 1020H×508V (0.52MP)

Effective pixels: PAL: 976H×582V (0.57MP); NTSC: 976H×494V (0.48MP)

Signal system: PAL/NTSC switchable

Resolution ratio(horizontal center): 700TVL

Video output: 1.0Vp-p/75Ω

Automatic gain control: 0.25/0.50/0.75/1.00, up to 55dB

White balance: on/off optional 

Exposure mode: electron exposure

Electronic shutter: 1/50(1/60) - 1/100000 S

Gamma correction: 0.45/1.0

Synchronization method: inter-sync

Camera lens: standard 2.8mm

Lens operating voltage: DC12V (wide voltage, measured can work normally at 7.5-13V)

Working current: 70mA (low power consumption)

Working temperature: -20℃~-60℃

Humidity: 0%~98% 

5.8G 40CH 0mW/25mw/200mw/600mw switchable VTX

Output power & transmission distance: ≥0.5km@25mW, ≥1km@200mW, ≥2km@600mW

Transmitting power: 0mW/25mW/200mW/600mW

Full video format: NTSC /PAL

Input voltage & power dissipation: 7V~24V, +12V/260mA@600mW

Size: 20*30*9mm

Weight: ≤7g(except antenna)

With output power self-check function.

Nixie tube SCAN: frequency point (1-8), frequency band (A-E), power (1-3, 0=0mw, 1=25mw, 2=200mw, 3=600mw)

Racerstar 5038 2 Blade Propeller


Material: PC

Mounting hole: 5mm

Center thickness: 8mm

Quantity: 10 pairs

Color: blue, red, yellow, purple, white

Weight: 7.25G a pair   

Delivery color randomly (10 pairs of propellers are the same color)

Battery Not included
Recommend 3-5S


Package included:

1 x 210mm frame kit
2 x 2206 2150KV brushless motor CW
2 x 2206 2150KV brushless motor CCW
1 x 
4 IN 1 30A BLHeli_S ESC
1 x 
Customized F4 flight controller
1 x 
700TVL CMOS camera

1 x 5.8G 40CH 0mw/25mw/200mw/600mw switchable VTX
2 x Battery strap
10 x Racerstar 5038 2 blade propeller CW
10 x Racerstar 5038 2 blade propeller CCW



Click ADD TO CART to Order Yours Now!


Every order you make with us benefits the environment. Thank you for protecting our seas, forests & wildlife with us!

In Stock: Leaves warehouse in 1 to 2 days
Free Worldwide Shipping Available


New Zealand Trends' 5 Point Customer Promise

  • 100% Risk Free - Safe payments
  • 30 Day Refund Policy
  • Real humans on our support helpdesk. 24/7/365 ticket and email support
  • FREE SHIPPING with no hidden charges + tracking number for every order
  • We use encrypted SSL certificates for 100% security

Not Sold In Stores - Online Exclusive!
Limited Stock Available - Get Yours Today!

Email - support@newzealandtrends.com

Customer Service Number - 64 9-889 6594

YOU SAVE! Our orders ship direct from the factory, cutting out the middleman in order to save you money!.

Product added to your Cart